Horizontal Wall mount 48/96port FTTH Fiber Optic Splice Closure
Product Discription
1.The enclosure casing is made of quality engineering plastics, and of good performance of anti-erosion against acid and alkali salt, anti-aging, as well as smooth appearance and reliable mechanical structure.
2.The mechanical structure is reliable and has the performance of resisting wild environment and intensive climate changes and serious working environment.
3.The protection grade reaches IP66.
4.The closures are applicable to ribbon type optical cable and common optical cable.
5.The splice trays inside the closure are turn-able like booklets, and have adequate curvature radius and space for winding optical fiber to make sure the curvature radius for optical winding 40mm.
6.Each optical cable and fiber can be operated individually.
7.The closure is of small volume, big capacity and convenient maintenance.
8.The elastic rubber seal rings inside the closure are of good sealing and sweat-proof performance. The casing can be opened repeatedly without air leakage. No special tools are required.
9.The operation is easy and simple. The air valve is provided for the closure and used to check the sealing performance.
Dimensions and Capability:
Dimensions ( L*W*H): 370*178*106mm
Maximum Capacity: Bundle -
Cable Entrances: 2 in 2 out
Diameter of Cable: Φ5mm - Φ23mm.
NO. of trays: 1-4
Sealing Method:Mechaniacal
Operation conditions:
Temperatures: -40ºC~+60ºC
Humidity: ≤95% (at 40ºC)
Air Pressure: 70kPa ~106kPa
Technical Specifications:
1.Seal performance: after the box is sealed, inflate to 100kPa inwards (inflation only apply to the models with the air hole), and then soak it in the water of normal temperature, after 15 minutes of steady observation, there is no bubble to overflow.
2.Insulation resistance: the insulation resistance between the metal work piece and the earth is greater th an 20kMΩ.
3.Pressurization: there is no breakdown or flashover under 15kVdc/1min between the metal work piece and the earth.
4.The curvature radius of the fiber 40mm, without extra loss inside the splice tray.
5.It can bear the axial tensile strength no less than 1000N.
6.Lifetime: 25 years.
7.Other performances are all in accordance with the requirement of standard YD/T814-1998.
Packaging Size
Each Closure have individual box Size:38.5*18.5*11.5(cm)
10 pcs closure packed into one out carton box Size:58.5*39.5*37.5(cm)
Optical Splice Tray: 12 fiber tray
Accessories
| NO. |
Name |
Quantity |
|
NO. |
Name |
Quantity |
| 1 |
Ring |
8 pc |
|
6 |
Nylon Tie |
1 set |
| 2 |
Insulation Tape |
1 pc |
|
7 |
Abrasive paper |
1 pc |
| 3 |
Labeling Paper |
1 pc |
|
8 |
Sealing Tape |
1 roll |
| 4 |
Heatshrinkable protective sleeves |
1 bag |
|
9 |
Stainless steel hook |
2 pc |
| 5 |
Steady Hose Clamps |
4 pc |
|
|
|
|
Audited Supplier 
){kind=link}